Paver Sealing in
Boca Raton, FL
Clean, re-sand, and seal — from the paver company that's actually based in Boca Raton. Affordable, honest sealing from $1.10/sq ft with a 3-year written warranty, finish samples brought to your driveway, and estimates usually same-day or next morning, because the crew lives here.
Affordable Paver Sealing in Boca Raton, From the Company That's Based Here
Craft Pavers is headquartered in Boca Raton — ZIP 33433, in the heart of west Boca. That's not a marketing line; it changes how sealing works for you. Estimates are usually same-day or next-morning because nobody is driving in from another county. We already know the architectural review temperament of Boca West, Broken Sound, and Woodfield Country Club, the tannin staining under East Boca's tree canopy, and the sprinkler rust that plagues well-irrigated lawns on our own side of town. And because Boca driveways are the ones we pass every day, the sealing work we do here carries our name around the neighborhood — a 3-year written warranty from a company five minutes away means something different than one from a truck you'll never see again.
The job itself is a sequence, not a spray: clean, re-sand, then seal. Boca's extreme UV (index 11–12 from April through September) breaks down unprotected paver surfaces and bleaches color; the summer downpour season drives the 2–3 year reseal cadence that most of the city runs on — and pushes it to roughly 18 months for the salt-exposed streets east of Federal Highway. Sealing before cleaning locks stains in permanently. Sealing without re-sanding leaves hollow joints under a protected surface. And sealing over damp pavers — tempting in an August "dry spell" — is how driveways turn milky white. We sequence and schedule the work so none of that happens, and we put it in writing.
What Boca Raton's Climate Does to Unsealed Pavers
Boca Raton splits cleanly at I-95: east of the interstate, salt air off the Atlantic and Intracoastal attacks sealer film continuously; west of it, the enemies are extreme UV, summer downpours, irrigation rust, and canopy shade that never lets surfaces dry. Each factor below shortens the life of an unsealed surface — and dictates a different part of our sealing spec.
| Climate Factor | Boca Raton Reality | What It Does Unsealed |
|---|---|---|
| UV Index | 11–12 (Extreme, April–September) | Color fade and surface oxidation — the top reason Boca pavers look old at year three |
| Summer Downpours | Heavy June–September rain season | Joint sand washout, water soaking into porous pavers, stains carried deep into the surface |
| Humidity & Shade | 70–75% avg · Dense ficus / black-olive canopy in East Boca & Camino Gardens | Algae, mildew, and tannin shadow-staining on surfaces that stay damp after rain |
| Salt Air (East of I-95) | Atlantic + Intracoastal exposure — Royal Palm, Por La Mar, barrier island | Continuous sealer degradation → ~18-month reseal cycle with marine-grade breathable products |
| Well-Water Irrigation (West Boca) | Sprinklers on well water across Boca West, Boca del Mar, Boca Falls, Mission Bay | Iron oxidizes on contact → orange rust staining bonds into unsealed porous pavers |
| Reseal Cadence | 2–3 years inland · ~18 months coastal | Past the window, water stops beading, stains bond, and the next job costs more |
East of I-95: the salt-air cycle — Salt air doesn't just sit on the surface; it attacks the sealer film itself, continuously. That's why coastal Boca — Royal Palm Yacht & Country Club, Por La Mar, the barrier island, the Intracoastal streets — lives on roughly an 18-month reseal cycle with marine-grade, breathable sealers, while the rest of the city holds the standard 2–3 years. The water test settles it either way: when rain stops beading and starts darkening the paver, the sealer is done regardless of the calendar.
West of I-95: rust and review boards — Western Boca's two signature sealing problems are chemical and procedural. Well-water irrigation leaves iron rust staining on driveways from Boca West to Mission Bay — we extract it before sealing, because sealer applied over rust preserves it for three years. And the club-corridor architectural committees care about sheen: a high-gloss wet look that sails through one ARC gets flagged by another, so we bring finish samples to the approval conversation, not after it.
Paver Sealing Services in Boca Raton
Driveway Sealing
The workhorse job — a typical 500 sq ft Boca driveway runs $550–$750 for the full protocol: pre-treatment, deep clean, stain extraction, fresh polymeric joint sand, breathable sealer, 3-year written warranty. Concrete pavers across Boca West, Broken Sound, and Boca del Mar take UV hardest; a sealed surface keeps its color and sheds oil, tannin, and rust instead of absorbing them.
Pool Deck Sealing
Travertine and light-toned concrete pool decks want a matte, breathable, slip-conscious finish — not a glossy film that turns slick when wet. We use penetrating sealers on natural stone so the surface keeps its texture and stays cooler underfoot, and we schedule around pool chemistry: chlorinated splash zones get products rated for constant moisture exposure.
Clean & Re-Sand (Included, Always)
Sealer locks in whatever sits under it, so the clean comes first: biological pre-treatment under East Boca's canopy zones, tannin and rust extraction, and a controlled low-pressure wash that keeps joint sand in place. Then every wash includes re-sanding — fresh polymeric sand swept and activated in every joint before the sealer goes down. It's part of the protocol, never an upsell.
Wet-Look & Matte Finishes
Both protect identically — the choice is how you want the surface to read. Wet-look deepens color on clay brick and darker concrete pavers; matte protects invisibly, which most travertine decks and the club-corridor ARCs prefer. We bring physical finish samples to your driveway so you decide in your own light, and where an ARC sign-off is prudent we prepare the documentation. See our wet-look vs matte guide.
Strip & Reseal — Fixing Failed Sealer
White haze, peeling film, blotchy gloss — the fingerprints of sealer applied over damp pavers or trapped efflorescence. When the film has failed, the fix is a chemical strip: remove the old sealer completely, let the surface dry, then reseal with a breathable product in a proper weather window. We diagnose whether your haze can be re-emulsified or needs the full strip before we quote.
Rust & Stain Treatment Before Sealing
Western Boca's well-water sprinklers leave orange iron staining; East Boca's ficus canopy leaves brown tannin shadows. Both must come out before sealing — sealer over a stain preserves it for three years. We use paver-safe chemistry (oxalic-based rust removers, oxygenated cleaners — never muriatic acid on travertine or shell stone) and tell you honestly when the real fix is a $20 sprinkler-head adjustment.
Paver Sealing Cost in Boca Raton, FL
Affordable doesn't mean cheap — it means the full job priced honestly, once. Our sealing starts at $1.10 per square foot, and every estimate is itemized so you see exactly what the number covers. Full county-level numbers are in our Palm Beach County sealing cost guide.
| Service | Price | What's Included |
|---|---|---|
| Full Sealing Protocol | $1.10 – $1.50 / sq ft | Pre-treatment, deep clean, stain extraction, polymeric re-sand, breathable sealer, 3-year written warranty |
| Typical 500 sq ft Driveway | $550 – $750 | The full protocol above — the most common Boca Raton job size |
| Marine-Grade Joint Sand (Coastal) | + $0.30 / sq ft | East of Federal Highway / Intracoastal-adjacent surfaces — itemized, not hidden |
| Strip & Reseal | Quoted on inspection | Chemical removal of failed sealer, full dry-out, clean, re-sand, reseal — scope depends on the old film |
| Budget-Tier Comparison | ~$0.75 / sq ft elsewhere | Skips prep, commodity sealer, fails in 12–18 months — you pay twice; we don't sell this tier |
Every estimate is free, on-site, and itemized line by line. Because Boca Raton is our home base, sealing estimates here are usually scheduled same-day or next morning.
What Actually Moves the Sealing Price in Boca
Two 500 sq ft driveways can quote differently. These are the factors we walk through at every estimate — the reason the per-square-foot number is a range, not a flat rate.
Condition of the surface
A driveway on a normal 2–3 year cycle needs a standard clean. One that skipped a cycle — with bonded rust, tannin shadows, or biological growth deep in the joints — needs longer chemical dwell time and more extraction work before any sealer can go down.
East or west of I-95
Coastal surfaces get marine-grade polymeric sand (+$0.30/sq ft) and salt-rated breathable sealer, and they run an 18-month cycle. Inland surfaces use the standard spec on a 2–3 year cycle. Same city, different chemistry.
Material being sealed
Concrete pavers take a film-forming or penetrating sealer straightforwardly. Travertine, marble, and shell stone need penetrating, breathable products and gentler cleaning chemistry — acid-based cleaners would etch them permanently.
Existing failed sealer
If a previous coat is hazing, peeling, or blotchy, it usually must be chemically stripped before resealing — otherwise the new coat inherits the old film's failure. Stripping is quoted after we test a small area to see how the old product responds.
Joint condition
Re-sanding is always included, but joints that have washed hollow over years take more polymeric sand than joints that just need topping off. Deep re-sanding is a material quantity difference, and it shows as its own line.
Finish choice
Matte, satin, and wet-look sit in the same price band — finish choice moves the ARC conversation more than the invoice. High-gloss two-coat systems on large areas can add a coat's worth of material and time.
Boca Raton Neighborhoods & Communities
From the club corridor west of I-95 to the salt-exposed streets near the Intracoastal — each part of Boca has its own sealing spec, reseal cadence, and (often) an architectural committee with opinions about sheen.
Boca West
33434 · Club community · ARC sheen review · Well-water rust treatment common
Broken Sound
33487 · Club corridor · Matte/satin ARC preference · 2–3 yr cycle
Woodfield Country Club
33496 · Strict ARC · Finish samples brought to approval · Estate driveways
St. Andrews
33496 · Club corridor · ARC review · Standard inland reseal cadence
Boca del Mar
33433 · Our home ZIP · Sprinkler rust staining · Same-day estimates
Boca Falls / Mission Bay
33428 · West Boca · Well-water irrigation rust · UV-heavy exposures
East Boca / A1A
33432 · Salt air · ~18-month reseal cycle · Marine-grade spec
Mizner Park Area
33432 · Downtown core · Clay brick & specialty surfaces · Tannin from street canopy
Royal Palm Yacht & CC
33432 · Intracoastal · Continuous salt exposure · Breathable marine sealers
Por La Mar
33432 · Barrier island edge · Oct–May sealing window · Salt-rated products
Camino Gardens
33486 · Mature ficus/black-olive canopy · Tannin & algae pre-treatment
Old Floresta / Spanish Village
33432 · Historic streets · Gentle chemistry on older masonry surfaces
Also sealing throughout ZIPs 33428, 33431, 33432, 33433, 33434, 33486, 33487, 33496, and 33498 — and nearby: paver sealing in Delray Beach and paver sealing in Deerfield Beach.
Sealing Is a Weather Decision Before It's a Chemistry Decision
Most failed sealing jobs in Boca Raton weren't bad products — they were good products applied at the wrong moment. These are the scheduling rules we won't break, even when it means telling you to wait.
- Dry surface, dry forecast — Sealer over damp pavers traps moisture under the curing film and turns it milky white. Between June and September we check the surface with a moisture read, watch radar, and reschedule rather than gamble. A one-week delay is cheaper than a strip-and-reseal.
- Coastal window: October–May — East of Federal Highway, between summer storm cycles and salt-morning humidity, the reliable sealing season is the dry months. We book barrier-island and Intracoastal resealing in that window on purpose.
- New pavers wait 30+ days — Freshly installed concrete pavers push efflorescence (white mineral bloom) as they cure. Sealing before the cycle completes traps the bloom under the film permanently. We let it finish, clean it off, then seal — the full chemistry is in our efflorescence guide.
- Clean and re-sand come first, always — Sealer locks in whatever is under it: tannin shadows, sprinkler rust, algae spores. Every job runs the full sequence — pre-treat, deep clean, extract stains, re-sand the joints, dry, then seal. Sealing over live spores is how you get green joints by spring.
- Cure time before traffic — Foot traffic same day in most conditions; vehicles typically stay off 24–48 hours depending on product and humidity. We put your specific cure schedule in writing at the walkthrough.
Deeper reading: why paver sealer turns white in Florida · efflorescence on new pavers · how to remove paver sealer.
Our Boca Raton Sealing Process: Clean → Re-Sand → Seal
On-Site Assessment — Usually Same-Day or Next Morning
Because we're based in Boca (33433), assessment turnaround here is the fastest in our service area. We measure the surface, identify the material, test any existing sealer, map stains (rust, tannin, biological), note your side of I-95 for the product spec, and flag whether your community's ARC will want a finish sign-off. Written, itemized estimate follows.
Pre-Treatment & Deep Clean
Biological pre-treatment goes down under canopy zones and on any algae or mildew. Rust gets paver-safe oxalic-based treatment; tannin shadows get an oxygenated cleaner with real dwell time. Then a controlled wash — soft pressure, wide fan, high water volume — that lifts the grime without blasting the joint sand out. Cleaning is a chemistry job before it's a pressure job.
Joint Re-Sanding — Included in Every Wash
After the surface dries, we sweep fresh polymeric sand into every joint the wash exposed and every joint that had run hollow over the years, then compact and activate it. Locked joints are what block weed growth and washout — sealing a surface with empty joints protects the pavers and abandons the structure between them.
Dry-Out & Weather Check
The surface must be fully dry before sealer touches it — not looks-dry, is-dry. We verify moisture, confirm the rain-free window, and only then proceed. If August humidity or an approaching cell says no, we come back. This single step is the difference between a clear finish and the white haze that keeps our strip-and-reseal crew busy on other companies' work.
Sealing, Cure & Walkthrough
Breathable sealer matched to your material and your side of I-95 — marine-rated east of Federal Highway — applied in your chosen finish, matte to wet-look. We walk the surface with you, put the cure schedule in writing (typically 24–48 hours before vehicles), and hand over the 3-year written warranty from a company headquartered a few minutes away.
Choosing a Finish in Boca Raton — Where the ARC Has a Vote
Travertine · Pool Decks · ARC-Safe Default
Matte / Natural Finish
Protects without changing how the surface reads — no added sheen, no color shift beyond a slight richness. The default for travertine and light stone, and the finish that architectural committees in Boca West, Broken Sound, Woodfield, and St. Andrews essentially never question. Penetrating matte products are also the most forgiving in Boca's humidity because they breathe: moisture vapor escapes instead of clouding under a film.
Driveways · The Middle Path
Satin / Semi-Gloss
A modest color enhancement and low sheen — enough to make a concrete paver driveway look freshly finished without reading as glossy from the street. In the club corridor this is the enhancement ceiling that passes ARC review without a conversation. Most Boca driveways that want 'a little richer than matte' land here.
Clay Brick · Courtyards · Check the ARC First
Wet-Look / High Gloss
Deep color saturation and a visible sheen — dramatic on clay brick, dark concrete pavers, and enclosed courtyards where the street view isn't in play. In ARC-governed communities a dramatic high-gloss finish can read as a 'change' even on existing pavers, so we bring samples to the approval conversation first. On pool decks we steer away from heavy gloss films for slip reasons.
East of Federal Highway · Salt Exposure
Marine-Grade Breathable (Coastal Spec)
Less a finish than a product class: breathable, salt-rated sealers for Royal Palm, Por La Mar, and the Intracoastal streets, paired with marine polymeric joint sand (+$0.30/sq ft). Available in matte through satin. This spec is what makes the coastal 18-month cycle a maintenance rhythm instead of a recurring failure.
Boca Raton Paver Sealing FAQ
Frequently Asked Questions
How much does paver sealing cost in Boca Raton — and is it actually affordable?
How often should pavers be sealed in Boca Raton?
Wet-look or matte — which sealer finish is right for a Boca Raton driveway?
Do you clean and re-sand the pavers before sealing?
My pavers were just installed — can you seal them right away?
My Boca Raton pavers turned white or cloudy after sealing — can that be fixed?
What about the rust stains from my sprinklers in west Boca?
When is the best time of year to seal pavers in Boca Raton?
Are you licensed and insured for paver sealing in Boca Raton?
Ready to Seal Your Boca Raton Pavers?
Clean, re-sand, and seal from $1.10/sq ft — with finish samples on your driveway, a 3-year written warranty, and an estimate usually scheduled same-day or next morning. We're based here; this is the easiest city on our map to say yes to.
More Paver Services in Boca Raton
Sealing Guides From Our Resource Library