Paver Prices in Florida — Install & Sealing per Sq Ft
Paver installation runs $12 – $32 per square foot across Florida. Sealing runs $0.75 – $1.50 per sq ft. Below: per-material install pricing, 20x20 and 1,000 sq ft project ranges, permit rules, and our interactive calculator for an instant estimate on your patio, driveway, or pool deck.
How Much Does Paver Installation Cost per Square Foot in Florida?
Paver installation in Florida runs $12 – $32 per square foot fully installed. Material selection is the biggest cost driver — concrete pavers land near the low end, travertine and brick in the middle, porcelain and natural stone at the top. These prices include excavation, compacted base, bedding sand, edge restraints, pavers, and labor.
| Paver Material | Cost per Sq Ft Installed | Best For |
|---|---|---|
| Concrete Pavers | $12 – $18 / sq ft | Most common pick for Florida driveways and patios |
| Brick Pavers | $14 – $22 / sq ft | Classic clay look; excellent for walkways and pool decks |
| Travertine Pavers | $18 – $28 / sq ft | Natural stone, cool underfoot — premium pool deck material |
| Porcelain Pavers | $22 – $32 / sq ft | Low-porosity, stain-resistant, modern large-format look |
| Natural Stone (marble, coral) | $24 – $32 / sq ft | Highest-end material; requires specialist installer |
Ranges reflect current South Florida labor + material costs (2026). Final price confirmed at a free on-site assessment.
What Does a 20x20 Paver Patio or 1,000 Sq Ft Driveway Cost in Florida?
Total install cost scales with square footage but not linearly — larger projects amortize mobilization, delivery, and setup across more area, so the per-square-foot price drops. Here's what typical Florida paver projects cost from small patio to full outdoor makeover.
| Project Size | Concrete Pavers (Low) | Premium Stone (High) | Typical Use |
|---|---|---|---|
| 10x10 patio (100 sq ft) | $1,200 | $3,200 | Coffee nook, grill pad |
| 20x20 paver patio (400 sq ft) | $4,800 | $12,800 | Standard backyard patio in South Florida |
| 600 sq ft walkway + entry | $7,200 | $19,200 | Front-of-house curb appeal upgrade |
| 1,000 sq ft driveway or patio | $12,000 | $32,000 | Full driveway or large lanai |
| 2,500 sq ft driveway + pool deck | $30,000 | $80,000 | Total outdoor makeover |
Rule of thumb: a South Florida 20x20 paver patio (400 sq ft) in concrete pavers costs about $4,800 – $7,200. Upgrade to travertine and you're near $8,000 – $11,000. A 1,000 sq ft paver driveway starts around $12,000 for concrete pavers and climbs toward $30,000 for porcelain or natural stone.
Is It Cheaper to Install Concrete or Pavers in Florida?
Poured Concrete Slab
$6 – $10 / sq ft installed
- + Lowest upfront cost
- + Fastest install (1–2 days)
- − Cracks with Florida ground movement
- − Repair = replacing whole slabs
- − Limited design and color options
- − Adds less resale value than pavers
Pavers
$12 – $32 / sq ft installed
- + Flex with ground movement — don't crack
- + Individual units can be lifted and reset
- + Add measurable resale value
- + Dozens of colors, patterns, materials
- + Lifespan 30+ years with sealing
- − Higher upfront cost, longer install
20-year total cost of ownership: a $10,000 concrete slab often costs another $6,000 – $10,000 in crack repair or full replacement over 20 years in South Florida. A $20,000 paver install with two resealing cycles ($1,100 each) totals $22,200 — and looks better every year. That's why 8 of 10 South Florida driveway upgrades over $10,000 choose pavers.
Do You Need a Permit to Install Pavers in Florida?
Yes — nearly every South Florida municipality requires a permit for paver driveways (they touch the public right-of-way) and for patios that exceed 100 sq ft, affect drainage, or sit near property lines. HOA approval often layers on top of city permits. We pull the permits as part of every installation project.
| Municipality | Paver Patio | Paver Driveway |
|---|---|---|
| Boca Raton | Usually required for patios over 100 sq ft or attached structures | Required — driveway permit + right-of-way review |
| Delray Beach | Required for permanent hardscape | Required |
| Fort Lauderdale | Required if drainage or setbacks are affected | Required + Broward County ROW |
| Miami-Dade unincorporated | Simple ground-level patios sometimes exempt — verify with building dept | Required |
| Palm Beach County | HOA approval often layered on top of city permit | Required |
Craft Pavers holds Florida CILB license U-22487 and pulls all required permits as part of every install estimate.
What Factors Influence the Cost of Paver Installation in Florida?
Six variables move the per-square-foot price. Understand these before you compare quotes — a "cheap" bid that skips base preparation or edge restraints is expensive within 24 months.
Paver Material Selection
Concrete pavers sit at the low end (~$12/sq ft). Travertine, porcelain, and natural stone push the price toward $32/sq ft. Material alone can shift a 1,000 sq ft project by $20,000.
Site Conditions & Excavation
Sloped lots, tree roots, poor drainage, or old concrete slab removal add labor hours and haul-off fees. Coastal soil sometimes needs deeper compaction — that shows up in the base-depth line item.
Base Preparation & Compaction
A proper base is 4–6 inches of compacted crushed limerock over geotextile fabric, with mechanical compaction in lifts. Skimping on base is the #1 reason South Florida paver patios sink or heave within 2 years.
Edge Restraints & Drainage
Aluminum or PVC edge restraints prevent pavers from spreading. On patios near slabs, we build in slope for drainage so summer storms don't pond against the house.
Design Complexity & Paver Sizes
Herringbone, circular kits, borders, banding, and mixed paver sizes add cut labor. A running-bond patio installs faster than a Versailles pattern travertine deck.
Project Size & Access
Larger projects lower the per-square-foot price because mobilization, delivery, and setup costs are amortized. Tight gate access or narrow side yards can add labor for wheelbarrow runs.
What's Included in a Professional Paver Installation Estimate
A trustworthy Florida paver install estimate is itemized. If a contractor hands you a one-line price, they're either hiding shortcuts or setting up change orders. Every Craft Pavers estimate breaks out:
- Excavation depth + haul-off fees
- Geotextile fabric under base
- 4–6 inches of compacted crushed limerock
- Bedding sand layer (1 inch)
- Pavers — specified by brand, color, dimensions
- Edge restraints (aluminum or PVC)
- Joint sand (polymeric optional)
- Sealer package (optional add-on)
- City permit + drawings
- Written workmanship warranty
- Cleanup and haul-off
- Timeline and payment schedule
Related: Paver sealing price breakdown · Our paver installation service · Paver sealing service
Paver Sealing Prices in Florida
Below is our sealing pricing by project size, with an interactive calculator so you can price your driveway, patio, or pool deck in seconds. Sealing runs $0.75 – $1.50/sq ft across Florida — our full protocol starts at $1.10.
Small Project
Up to 1,000 Sq Ft
/ Sq Ft
- All options below included
- $1,000 minimum cost
- Colored sand to match pavers (Add-on)
- Pavers repair (Add-on)
- Strip old sealer (Add-on)
Medium Project
From 1,000 - 2,500 Sq Ft
/ Sq Ft
- All options below included
- No minimum cost
- Colored sand to match pavers (Add-on)
- Pavers repair (Add-on)
- Strip old sealer (Add-on)
Large Project
More than 2,500 Sq Ft
/ Sq Ft
- All options below included
- No minimum cost
- Colored sand to match pavers (Add-on)
- Pavers repair (Add-on)
- Strip old sealer (Add-on)
Included in All Packages
Every paver sealing project includes our comprehensive 8-step process for maximum durability and stunning results.
Prewash Treatment
Solutions used to remove mold, mildew, rust and organic stains
Joints Cleaning
A must process in preparation of new sand application
Steam Surface Cleaning
The top of the pavers is being buffed with a high-pressure hot water machine
Performance Cleaning
Prepares the surface for sealing by creating optimal conditions for sealer adhesion
Apply High Quality Sealer
Customer will be given options based on the looks and paver stone
Re-Sand Joints / Silica Sand
Newly cleaned joints are being filled with new clean silica sand
Application Method
Sprayed with flood coat for joint stabilization
Backroll Sealer Excess
Ensures an even application by backrolling before the sealer impregnates
Draw Your Area on the Map
Search for your address, then click on the map to draw the outline of your paver area. We will calculate the total square footage and estimated price automatically.
1. Find Your Property in Florida
2. Draw Your Area
- 1Click on the map to add corner points
- 2Add at least 3 points to form a shape
- 3The area will be calculated automatically
Your Estimate
Points
0
Area
0sq ft
Draw at least 3 points on the map to calculate the area and price.
Loading map...
Note: This is an estimate. Final pricing may vary based on site conditions. Contact us for an accurate assessment.
Paver Pricing FAQ — Florida
How much does paver installation cost per square foot in Florida?
What is the average cost to install a 1000 sq ft paver patio or driveway in Florida?
How much should a 20x20 paver patio cost in Florida?
Is it cheaper to install concrete or pavers in Florida?
Do I need a permit to install pavers in Florida?
What factors influence the overall cost of paver installation in Florida?
What is included in a professional paver installation estimate in Florida?
How much does paver sealing cost in Florida?
How often should pavers be resealed in Florida?
Do pavers increase home value in Florida?
Ready for a written, itemized estimate? Book a free on-site assessment — Craft Pavers, Boca Raton FL 33433 · Florida CILB #U-22487 · 45 Google reviews.
The Most Affordable Paver Sealing Prices in Florida
100% Satisfaction Guarantee on Every Job | Free Estimates